Adventurer Old Man Emu Front Standard Length Pin/Pin Shock – Single, GL2000
$47.1
$79.12
Description 1 x OLD MAN EMU Nitrocharger Plus (Standard Length) Front Pin/Pin Shock Part Number:- GL2000, Old Man Emu Standard Length Front Pin/Pin Shock – Single Manufacturer:- Old Man Emu Weight:- 3.3kg Fits:- Defender 90, 110, 130 / Discovery 1 / RRC Shock Length open:- 554mm Shock Length closed:- 329mm Main Body Diameter:- 58mm Plastic Shroud Diameter:- 69mm These OME Shock Absorbers fit Standard Height Front Turrets. Part Number – GL1144 Standard Length Shocks – These can be fitted… • To a vehicle with or without Anti Roll Bars • 1” Lowered Ride Height • Standard Ride Height or up to 2” Lift These shocks are used with our Adventurer STD Suspension Kit, which uses standard length shock absorbers, can be used from standard height springs to a 2 inch lift. Both anti roll bars can be used with this suspension kit. If yours is mainly a road vehicle and you do not require the extra articulation, then this kit will work. For the full description – Gwyn Lewis Adventurer STD Suspension Kit & Pricing You will not need extended Brake Hoses or Spring Re-Locators. Extended Bump Stops will be needed if using a lift spring. Protect the shock absorber from paint chips and rust by using this GL1249, Shock Absorber Protection Heat Shrink. They come ready assembled with the bushes and our bush isolation washers on each end (these bush isolation washers are very important, to help stop the pin of the shock wearing away, all our shocks come with them ready fitted). See the bush isolation washers here – GL1076. Please click HERE to download the Shock Isolation Washer fitting instructions. The OME Shocks are designed to provide enhanced ride comfort and handling on and off road. Its finely tuned and balanced valving system is among the most advanced on the market. If the Defender 90 is very light and carries no extra weight, then these GL2000 shocks can be fitted to the rear to improve comfort, as they are a softer valved. GL1171 Pin/Pin shock mounts will be needed to fit the shocks.
